Throughput Run chart

Owned by Couthaïer Farfra
Last updated: Dec 16, 2024
9 min read

The Throughput Run Chart is a performance monitoring tool that visualizes throughput over time. Unlike the histogram, which shows a static distribution of flow values ​​over a period, Flow Monitoring allows you to see how flow changes over time, often in real time. This type of chart is particularly useful for monitoring the performance of a system or application over a period of time and spotting significant trends or fluctuations.

  • Throughput: Throughput represents the amount of work accomplished by a system over a given period of time. This may include the number of transactions, requests processed, or data transferred per second, minute, hour, etc.

  • Evolution over time: Throughput tracking shows how these values ​​change over time, providing a dynamic, temporal view of performance.

Operation and Usefulness

The Throughput Run Chart is particularly useful for:

  1. Track trends in flow: It allows you to visualize gradual or abrupt changes in flow over time, revealing increasing, decreasing trends, or periods of stability.

  2. Detect anomalies and spikes: By tracking flow rates, it becomes easy to spot anomalies, such as sudden spikes (rapid increase or decrease in throughput) that could signal unexpected events, performance issues, or changes in performance. behavior of the system.

  3. Optimize processes: The run chart can help identify periods when the system is operating optimally or suboptimal, allowing decisions to be made to adjust resources or improve efficiency.

  4. Measure the impact of changes: If an update or modification is applied to a system, the run chart can be used to monitor the impact of this change on throughput over time.Comment lire un Throughput Run Chart ?

The Throughput Run Chart is in the form of a line drawn on a graph where each point represents the throughput observed at a given time.

Here are the key elements to understand when reading:

  1. Horizontal axis (x): This axis represents time, generally divided into regular intervals, depending on the chosen observation period.

  2. Vertical axis (y): This axis represents the throughput.

  3. Trend line: This allows you to visualize the evolution of the flow rate over time, whether it is an increase, a decrease or a regular variation.

  4. Key points to observe:

    • Spikes (high flow values): If the flow suddenly increases, this may indicate a period of high activity or peak demand.

    • Dips (low throughput values): Sudden drops may signal reduced activity or a performance issue (such as overload or slowdown).

    • Plateaus: If the flow line is relatively stable, this means that the system is maintaining a constant flow rate, which can be interpreted as a good sign of stability, unless the plateau is at low flow levels, which could indicate a problem.Utilité dans Wiveez

The Throughput Run Chart in Wiveez allows users to:

  • Monitor performance in real time: By continuously observing throughput, users can quickly respond to performance variations and adjust resources accordingly.

  • Diagnose problems: Quickly identifying spikes or dips in throughput helps locate bottlenecks or periods of overload in a system.

  • Predict future trends: By studying the evolution of flow rates over a long period of time, users can anticipate future resource needs or prepare adjustments to maintain optimal flow.

The chart

Filters

Quartiles: Analyze the Distribution of the Performance of Your Flow

Quartiles divide the data into four equal parts, allowing us to understand how it is distributed.

They are particularly useful for getting an overview of the performance distribution in a process.

Definition of Quartiles

  • Q1 (First quartile): 25% of data is below this value.

  • Q2 (Median or second quartile): 50% of the data is lower than this value.

  • Q3 (Third quartile): 75% of data is below this value.

Inter-quartile ranges (IQR) can also be used to detect outliers.

The IQR will represent the lower and upper limits admissible to have a predictable flow distribution. These are the famous mustaches. Values ​​falling outside must be considered as outliers and analyzed.

The IQR is defined as Q3−Q1.

A common rule is to consider any value outside of Q1 − 1.5 × IQR and Q3 + 1.5 × IQR as an outlier.

Example of calculating Quartiles

  1. Sort data in ascending order: 17; 18; 19; 19; 20; 20; 21; 22; 23; 24

  2. Calculate the First Quartile – Q1 by identifying the Cycle time of 25% of the measurements – Result: Q1 = 19

  3. Calculate the Second Quartile, i.e. the Median, representing 50% of the measured cycle times – Result Q2 = 20

    1. Odd List: When the number of measures is odd, take the middle value

    2. Even List: When the number of measurements is even, as in our example, add the 2 central values ​​and divide them by 2. The result represents the Median.

  4. Calculate the Third Quartile – Q3, representing 75% of measurements taken – Result: Q3 = 22

  5. Identify the Whiskers, i.e. the lowest value and the highest value measured – Result:

    1. Calculate the inter-quartile (IQR)

      1. IQR = Q3 – Q1 = 22 – 19 = 3

      2. Low limit = Q1 – 1.5IQR = 19 + 1.53 = 14.5

      3. High limit = Q3 + 1.5IQR = 22 + 15*3 = 26.5

Utility

Quartiles are often used to visualize the distribution of data and identify points where the majority of values ​​fall. This allows you to see where the central values ​​are (using the median) and identify gaps or outliers.

Let's take the example of a development team that delivers tickets every two weeks. By analyzing the number of tickets delivered over multiple periods, quartiles give us insight into the distribution of deliveries. This helps understand how many tickets are delivered in the bottom 25%, middle 50%, and top 25%.

UCL/LCL: Keeping your Process under Control

Control limits (UCL and LCL) are statistical thresholds used in control charts. They allow a process to be monitored to detect anomalies and determine whether it is stable.

  • UCL (Upper Control Limit): Upper control limit.

  • LCL (Lower Control Limit): Lower control limit. These limits are typically set at 3 standard deviations above and below the mean, meaning that 99.73% of the data should fall within this range in an “in control” process.Utilité

Control limits are ideal for detecting anomalies in a process. If any data falls outside of these limits, it may indicate a problem that requires investigation (such as an unexpected change in performance).

UCL/LCL : Comment les calculer ?

Les limites de contrôle (UCL/LCL) sont utilisées dans les cartes de contrôle pour surveiller un processus. Elles sont basées sur la moyenne et l’écart-type, et définissent une plage de variation normale. Elles sont calculées en appliquant la règle des 3-sigma, soit trois écarts-types au-dessus et en dessous de la moyenne.

UNPL/LNPL: Understanding Natural Variability

Unlike UCL and LCL, natural process limits (UNPL and LNPL) are not based solely on statistical calculations, but rather on a thorough understanding of the process and accepted tolerances.

  • UNPL (Upper Natural Process Limit): Natural upper limit.

  • LNPL (Lower Natural Process Limit): Natural lower limit. These limits reflect the natural range of variation of the process, defined by accepted specifications or tolerances, not by statistical deviations alone.

Utility

Natural limits are particularly useful when you have a good empirical understanding of the process or when specific tolerances must be met (for example, industry standards or customer requirements). They help avoid overreacting to small variations while ensuring that the process operates within the defined acceptable range.

Example

1 – Data collection and distribution analysis

  • In general, the first step is to identify whether the process follows a normal distribution or not. Natural boundaries can sometimes be calculated differently depending on the distribution of the data.

2 – Determine acceptable tolerances (or specifications)

  • UNPL/LNPL can be based on accepted tolerances or performance specifications defined by business needs, customer requirements or internal standards. If these tolerances exist (for example, a team expects to deliver between 15 and 25 tickets per iteration), they can directly guide the calculations.

  • If specifications or tolerances are already established, natural limits can be set accordingly. For example, if the team considers that by delivering less than 16 tickets or more than 26, it is deviating from its normal behavior, then:

    • LNPL = 16

    • UNPL = 26

3 – Calculate natural limits based on observed variability

  • If you do not have pre-established tolerances, you can calculate UNPL/LNPL based on historical process data.

3.1 – Calculate the median or an adjusted average

  • The median is often used instead of the mean if the process has outliers or asymmetric variations. This gives a central measurement less influenced by extreme values.

  • In our case, the median of tickets delivered over 10 periods is:

    • Median = 20

    • If you use the average, it is: Average(xˉ) = 20.3

3.2 – Calculate the natural range of variability

  • The natural variability of the process is often estimated from the interquartile range (IQR), which measures the dispersion between the lowest 25% of data and the highest 25%.

  • For our example, the quartiles are as follows:

    • Q1 (1st quartile)=19: 25% of tickets delivered are less than or equal to 19.

    • Q3(3rd quartile)=22: 75% of tickets delivered are less than or equal to 22. 

  • The interquartile range (IQR) is: IQR = Q3−Q1 = 22−19 = 3

3.3 – Calculate natural limits

A common method is to multiply the IQR by a factor, often 1.5×IQR, to identify the acceptable range of variation.

Thus, the natural limits can be calculated as follows:

  • UNPL = Q3+1.5×IQR = 22+1.5×3 =22+4.5 = 26.5

  • LNPL= Q1−1.5×IQR = 19−1.5×3 = 19−4.5 = 14.5

3.4 – Adjust limits based on observations and specifications

  • Once the initial limits are calculated, you can adjust them based on empirical observations or process goals.

  • For example, if your team finds that delivering fewer than 16 tickets or more than 26 tickets is unacceptable, you could set the UNPL/LNPL respectively to those values, even if the calculations indicate a slight variation.

You see, based on this example, that the UNPL and the LNPL are very complementary to the measurement with the Quartiles by integrating the limits not to be exceeded to remain in a stable system.

Predictability Analysis

The Predictability analysis makes it possible to measure the quality of the flow and the level of confidence in its use for projections.

The analysis is based on the Thin-Tailed - Fat-Tailed principle

Of course ! The concept of Thin-Tailed and Fat-Tailed distributions is often used in risk analysis, statistics and finance to understand and model the impact of rare and extreme events. Here is a description that you could integrate into the Wiveez user documentation, adapted to explain their principle, their operation and their usefulness in this context.

Thin-Tailed and Fat-Tailed: Principle and Usefulness

Principle:

In data modeling, particularly in finance and risk management, we often talk about probability distributions to describe how events or values ​​are distributed. Two types of distributions are particularly important: Thin-Tailed and Fat-Tailed distributions.

  • Thin-Tailed: A thin-tailed distribution is characterized by a relatively low probability that extreme events (or large deviations from the mean) will occur. In other words, extreme values ​​(very far from the average) are rare. A typical example would be the normal (or Gaussian) distribution, where most of the data concentrates around the mean and extremes are very unlikely.

  • Fat-Tailed: In contrast, a fat-tailed distribution has a higher probability of extreme events. This means that rare (but very impactful) events are more frequent than would be expected with a thin-tailed distribution. Fat-tailed distributions are used to model phenomena where extreme events have a disproportionate impact, such as stock market crashes or economic crises.

Detailed ticket analysis

Wiveez allows the user to analyze the performance of each flow in detail by displaying the list of tickets associated with a column and displaying the details of the Flow Metrics of a ticket.

Analyze with our AI Alice

Wiveez provides you with its AI, named Alice, to help you analyze graphs.

  1. Click on the Alice icon to start analyzing your graph;

  2. A page is displayed containing an analysis of the health of your graph and tips for improvement;

  3. You can save this analysis in a PDF file;

  4. You can copy/paste the analysis into another type of document.

As long as no modification has been made to the chart filters or no data refresh has been initiated, your analysis remains accessible.